Filter
Top Products
50
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
Using the supplied
spanner, unscrew
and remove the 2
rear bottom screws.
Slide out the 2 plas-
tic pins. Lay the
machine on its back,
taking care not to
squash the hoses.
This can be avoided
by placing one of the corner packing pieces
between the machine and the floor.
Remove the polystyrene block from the
bottom of the machine and release the
two plastic bags.
Carefully slide out the left-hand bag
removing it towards the right and then
downwards.
Slide out the right-hand bag removing it towards the left and then
upwards.
The bottom cover
plate, which can
be found inside
the machine with
the instruction
book, will now
need to be fitted.
Hook the bottom
of the plate 'A',
into position first. Then push the other end of the plate into position.
Important!
You can find more detailed instructions regarding the bottom cover assemblig
in its relative bag.
P1129
P1124
2
3
1
P1204
2
1
A
P1205
P0001
132984060.qxd 17/06/2005 15:58 Pagina 50