Filter
Top Products
4. Slide out the relevant plastic spacers.
5. Open the porthole and remove the poly-
styrene block fitted on the door seal.
6. Fill the smaller upper hole and the two
large ones with the corresponding plas-
tic plug caps supplied in the bag contain-
ing the instruction booklet.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the ma-
chine is not impeded by carpets, rugs etc.
Check that the machine does not touch the
wall or other kitchen units. Level the wash-
ing machine by raising or lowering the feet.
The feet may be tight to adjust as they incor-
porate a self locking nut, but the machine
MUST be level and stable. If necessary,
check the setting with a spirit level. Any nec-
essary adjustment can be made with a span-
ner. Accurate levelling prevents vibration,
electrolux 27