Filter
Top Products
10 electrolux control panel
Option icons [when available]:
Easy Iron , Extra Rinse ,
Sensitive , (see «Daily Use»
paragraph)
Child safety lock: (see «First
Use» paragraph)
Soil degree icons: Intensive
Normal/Daily , Light/Quick
Super Quick .
Duration of the selected
programme/End of
programme/Delay
time/Incorrect option
selection/Alarm codes
After selecting a programme, the
duration is displayed in hours and
minutes (for example 2.05).
The duration is calculated automatically
on the basis of the maximum
recommended load for each type of
fabric.
After the programme has started, the
time remaining is updated every
minute.
/End of programme
When the programme has finished
three flashing zeros is displayed, the
icon disappears and the door
can be opened.
/Incorrect option selection
If an option which is not compatible
with the set wash programme is
selected, the message Err is displayed
at the bottom of the display for a few
seconds and the integrated red light of
button
8 start flashing.
7.10
7.8
7.7
7.6
7.5
/Alarm codes
In the event of operating problems,
some alarm codes can be displayed,
for example
E20 (see paragraph “What
to do if...”).
Clock icon:
After the programme has started, the
duration is displayed and the clock
icon is animated.
Door locked icon:
After you have pressed button 8 and the
machine has started, this icon is
illuminated and only the phase running
icon stays on. When the programme has
finished, three flashing zero (0.00) are
displayed and this icon disappears.
Washing programme phase
icons: Prewash , Wash ,
Rinses , Drain
,
Spin
By selecting the wash programme, the
washing programme phase icons
corresponding to the various phases
making up the programme are shown
in the upper part of the display. After
having pressed button 8 only the icon
of the running phase stays on.
Delay icon:
The selected delay set by pressing the
relevant button appears on the display
for a few seconds, then the duration of
the previously selected programme is
displayed. The relevant icon is
illuminated.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
7.12
7.11
7.10
7.9
132964640.qxd 19/07/2008 12.00 Page 10