Conair CS19VCSIB-9786 Washer User Manual


 
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when
children are present, basic safety precautions should
always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER -
Any appliance is electrically
live even when the switch is off. To reduce the
risk of death by electric shock:
1.
Always unplug appliance immediately after using.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or other liquid.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING -
To reduce the risk of burns,
electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in.
2. Do not pull, twist, or wrap line cord
around appliance, even during storage.
3. This appliance should not be used by, on
or near children or individuals with certain
disabilities.
4. Use this appliance only for its intended use, as
described in this manual. Do not use attachments
not recommended by the manufacturer.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped or
damaged, or dropped into water. Return the
appliance to an authorized service center for
examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening or hose.
9. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
10. Unit is hot when in use. Do not let heated
surfaces touch eyes or bare skin.
11. Do not place the heated unit directly on
any surface while it is hot or plugged in.
12. Never block the air openings of the appliance
or place on a soft surface such as a bed or
couch, where the air openings may be blocked.
Keep the air opening free of lint and other debris.
13. Do not use an extension cord with this
appliance.
14. Do not touch hot surfaces of the
appliance. Use handles or knobs.
15. Before plugging in, read the information
about dual voltage contained in the instruction
section of this manual.
16. Do not attemp to touch the housing of
your appliance near the straightening plates,
as it is hot when in use.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This straightening iron appliance is intended
for household use. This unit is designed to
operate at 120/240 volts AC. Use on Alternat-
ing Current (50/60 hertz) only.
This appliance has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
DUAL VOLTAGE
This straightening iron will automatically adjust
to the proper voltage. Use an adapter plug with
correct configuration, prior to use in outlet.
STRAIGHTENING BASICS
Plug the straightening iron cord into any
household outlet (120/240V). Press ON/OFF
button. Red light will blink until it reaches
desired temperature setting and then becomes
soild. To activate Turbo, press button and green
light will go on and increase plate tempera-
tures up to 15-20 degrees C. To turn off, press
ON/OFF button again until red light goes out.
Never leave your straightening iron on and
unattended. However, should you fail to turn
the unit off, it will shut itself off automatically
within 60 minutes.
WARNING:
The straightening iron’s ceramic-
coated plates will get very hot within a few
seconds and should not be placed in contact
with the skin after the straightening iron has
been turned on.
Start with a hair section that is 2" (5 cm) wide
and no more than 1/2" (1.25 cm) thick. Open
the iron and place a hair section between the
two hot plates, close to the scalp. Trap hair
between the plates by firmly squeezing the
handles together. While maintaining the
tension, slowly pull the unit down along the
hair section toward the end of hair. At the end
of hair section, release the pressure on the
handle and allow the hair section to slide out.
Repeat process on additional sections of hair
until you achieve the hair style you desire. It
may be necessary to repeat process on certain
areas, depending on the texture of your hair.
Some experience is necessary when learning
to use this straightening iron. After using iron
several times, you will learn the ideal way to
straighten and style your hair easily.
For faster styling results, we have added a
unique optional Turbo Heat on/off feature. Press
the Turbo button to deliver up to 20°C/36°F
more heat in the highest setting, for maximum
styling performance.
NOTE: Please refer to the temperature setting
guide for heat settings.
STYLING WITH THE NEW EASY-GLIDE
FLOATING CERAMIC-COATED PLATES
The plates of your new straightening iron are
designed with a little give, to “float” in your iron.
This provides better contact with hair, eliminating
gaps for straighter results. The easy-glide
ceramic surface is the one of the latest – and
best – technological advances in hair appliances.
The ceramic even heat distribution produces the
ultimate in healthy, shiny, silky looking hair. You’ll
find that hair glides easily over the surface of the
plates as you’re straightening, and that it is
easier to clean styling products residue, etc. off
the plates after each use. The ceramic surface
also helps smooth down flyways and frizzies. As
you smooth your hair, heat is evenly distributed
so that the style you create has a salon-perfect,
silky smooth, shiny finish. Hair also glides right
through the plates after it’s straightened.
And that’s not all. Conair’s professional salon stan-
dards of engineering provide you with a Uniform
Heat Recovery System to maintain the straighten-
ing iron at a constant temperature.
A constant surge of power ensures that heat is
continuously delivered for optimal styling results,
unlike other units that lose heat during use. It
provides consistent styling power so that every
strand of hair is set with the same level of heat
for uniform results and a perfect finish.
Ceramic technology is a pleasure to work with,
makes styling your hair easier and provides
professional results.
USING INSTANT HEAT, THE 25 VARIABLE
TEMPERATURE SETTINGS AND
UNIFORM HEAT RECOVERY SYSTEM
This straightening iron features Conair’s Instant
Heat technology. It quickly heats up to the tem-
perature you’ve selected for your hair type and is
then ready to use.
Within this Instant Heat technology there are 25
temperature settings for every type of hair, from
the finest to the curliest and most resistant.
Temperature Setting Guide
TEMP. CONTROL HAIR TYPE
Low 1-8 Delicate, thin, easy-to-straighten hair
Medium 9-14 Average to thick or treated hair
Med-High 15-20 Thick or wavy hair
High 21-25 Hard-to-straighten hair
Turbo Heat™ Up to 20°C/36°F burst of heat
for difficult styling spots
Before After
TURNS CURLS INTO
SMOOTH HAIR IN SECONDS