Campbell Hausfeld PW1375 Washer User Manual


  Open as PDF
of 4
 
Garden Hose Connection
GARDEN HOSE CONNECTION
INSTRUCTIONS
1. Attach nipple adapter to inlet fit-
ting on the unit (this may already be
attached to the pump).
2. Attach quick connect fitting to
garden hose.
3. Pull side “A” of quick connect fit-
ting toward garden hose and push
onto nipple adapter.
4. Push side “A” of quick connect fit-
ting towards nipple adapter and
release.
"A"
Figure 2 - Garden Hose Connection
Quick Connect Fitting
Garden Hose
Nipple
Adapter
Electric Pressure
Washer
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or prop-
erty damage! Retain instructions for future reference.
IN456800AV 10/99
© 1999 Campbell Hausfeld
Specifications
Max Pressure with Effective Pressure Maximum Motor Power Maximum Inlet Unit
Model Standard Lance w/Turbo Lance Capacity (Single Phase) Voltage Water Temperature Weight
Assembly Instructions
Assembly Instructions and Parts List PW1345, PW1346, PW1350 , PW1375, and PW1376
! IMPORTANT !
This pressure washer maybe
equipped with a microswitch sensi-
tive to water flow. This Instant
Start/Stop switch (ISS) senses water
flow in the pump. When the trigger
is released, water stops flowing
through the pump. The ISS then
automatically turns the motor off to
protect pump from overheating.
OPERATION
1. Turn the “ON/OFF” switch to
“ON”.
2. Pull trigger on gun to begin
spraying water.
3. Release trigger. The pressure
washer motor will stop running.
4. To spray again, pull trigger and
motor and pump will restart.
Note: Occasionally the motor may
run for a short time to bring fresh,
cool water into the pump even if
trigger is released. This is part of
normal operation and will not dam-
age the unit.
Always turn the
“ON/OFF” switch
to “OFF” then trigger gun to release
hose pressure before unplugging
power cord.
Risk of Injection.
Unit will start
spraying when trigger is squeezed if
on/off switch is in “ON” position.
Always point gun in safe direction.
Call 1-800-330-0712
for Technical Service
NOTE: REFER TO PRODUCT MANUAL FOR
ALL SAFETY INSTRUCTIONS
For parts, product & service information
visit www.campbellhausfeld.com
Notas
Instrucciones de montaje y lista de piezas PW1345, PW1346, PW1350, PW1375, y PW1376
U
L
Approved
#7P64
No. de Número del
Ref. Descripción Repuesto Ctd.
Para ordenar repuestos, sírvase llamer al 1-800-330-0712 (En
los Estados Unidos, o llame a su distribuidor local)
Sírvase proporcionar la siguiente información:
-Número de modelo
-Número de serie (si lo hubiera)
-Descripción y número del repuesto, según se indica en la lista de repuestos.
Dirija su correspondencia sobre repuestos a:
The Campbell Group / Parts Dept.
100 Production Drive
Harrison, OH 45030 U.S.A.
1 Lanza regulable PM035101AV 1
*2
Lanza turbo PM022621AV 1
3
Manguera PM012902AV 1
4
Pistola PM037201AV 1
5
Niple adaptador PM022100AV 1
6
Conector rápido PM020600SV 1
7
Limpiador de puntas PM008500AV 1
8 Aplicador de detergente PM014700SV 1
* 9 Juego de ruedas (2) PM014100SJ 1
*10 Mango PM014200SV 1
*11 Tapa de la caja de herramientas HV601500SV 1
*12 Caja de herramientas HV601600SV 1
* Equipo opcional, tal vez no se suministre con todos los modelos.
Figure 1
PW1345 1300 psi — 1.8 GPM 13 Amps 120V 100˚F 25 lbs.
PW1346 1300 psi — 1.8 GPM 13 Amps 120V 100˚F 25 lbs.
PW1350 1300 psi — 1.8 GPM 13 Amps 120V 100˚F 25 lbs.
PW1375 1300 psi 1750 psi 1.8 GPM 13 Amps 120V 100˚F 25 lbs.
PW1376 1300 psi 1750 psi 1.8 GPM 13 Amps 120V 100˚F 25 lbs.
next