Filter
Top Products
© 2004 American Standard Inc.
2
FONTAINE™ ELONGATED
PRESSURE-ASSISTED
ONE-PIECE TOILET VITREOUS CHINA
FONTAINE ELONGATED PRESSURE-ASSISTED
ONE-PIECE TOILET
❏ 2045.013
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Low-profile, one-piece toilet
• Elongated bowl/flushometer tank*
• Top-mounted push button actuator
• Includes color-matched Rise and Shine™
plastic seat and cover (#5324.019) with
easy-to-clean, lift-off hinge system
• Pressure-assisted siphon jet flush action
• 2 bolt caps
• Fully-glazed trapway
• 100% factory flush tested
Nominal Dimensions:
31" x 18-1/8" x 24-1/8"
(787 x 460 x 613mm)
Fixture only, supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M (and 19.6M) for Vitreous
China Fixtures - includes Flush Performance,
Ball Pass Diameter, Trap Seal Depth and
all Dimensions. Minimum Pressure - 30 psi static
required.
To Be Specified
❏ Color:
❏ Supply with stop:
Revised 10/04
SUPPLY
AS REQ'D
*
460mm
(18-1/8)
613mm
(24-1/8)
248mm
(9-3/4)
378mm
(14-7/8)
216mm
(8-1/2)
13mm
(1/2)
305mm
(12)
127mm
(5)
356mm
(14)
476mm
(18-3/4)
C/L OF SEAT
POST HOLES
140mm (5-1/2)
CENTER
C/L OF OUTLET
FINISHED
FLOOR
FINISHED
WALL
13mm
(1/2)
76mm
(3)
178mm
(7)
787mm
(31)
C/L
(114mm)
4-1/2
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12")
FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance
established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.
* Flushmate III tank system by Flushmate® Div. of Sloan Valve Co.
Replaces model 2042.017