Filter
Top Products
4 Maytag Co. 113489-5 (W10185535)
Important Information ________________
IMPORTANT: A means of restraint must be used to prevent
straining of the gas supply when the dryer is moved.
An external means of power removal (disconnect device)
must be provided by the installer.
List of Acronyms _______________________
AWG American Wire Gauge
HVAC Heating, Ventilating, and Air-Conditioning
in wc Inches of Water Column
L.C.D. Liquid Crystal Display
L.E.D. Light Emitting Diode
L.P. Liquid Propane
UL Underwriters Laboratory
“Caution: Label all wires prior to
disconnection when servicing controls.
Wiring errors can cause improper
operation.”
«Attention: Au moment de l’entretien des
commandes, étiquetez tous les fils avant de
les débrancher. Des erreurs de câblage
peuvent entraîner un fonctionnement
inadéquat et dangereux.»
WARNING
The dryer must never be operated with any
of the back guards or service panels
removed. Personal injury or fire could result.
The wiring diagram for the dryer is located
behind the front control panel on the right
side.
Table of Contents ________
SPECIFICATIONS ....................................................... 5
INSTALLATION PROCEDURES .................................. 6
Location Requirements ........................................... 6
Dryer Enclosure Requirements ............................... 7
Fresh Air Supply Requirements .............................. 7
Exhaust Requirements ........................................... 7
Electrical Information ............................................ 10
Gas Information ..................................................... 11
Preparation for Operation/Start-Up ........................ 12
Preoperational Test ............................................... 13
Operating Instructions ........................................... 13
Shutdown Instructions .......................................... 13
SERVICE/PARTS INFORMATION ............................. 13
Service .................................................................. 13
Parts ..................................................................... 13
ROUTINE MAINTENANCE ......................................... 13
Cleaning ................................................................ 13
Adjustments ......................................................... 14
DATA LABEL INFORMATION .................................... 14