Filter
Top Products
9
B. LUBRICATION
MONTHLY
The two (2) bearings that support the impellor/fan shaft must be lubricated.
Use Shell Alvania #2 grease or its
equivalent. Generically, this grease would be described as an NLGI Grade 2 multipurpose industrial grease with
a lithium thickener and mineral base oil.
EVERY 3 MONTHS
The four (4) bearings that support the drive and idler shafts must be lubricated. Use Shell Alvania #2 grease or
its equivalent. Generically, this grease would be described as an NLGI Grade 2 multipurpose industrial grease
with a lithium thickener and mineral base oil.
Apply grease (
Use Viscosity Shell Alvania #2 grease or its equivalent) to the tilting hinges (on 1-Way Tilt Models
ONLY).