Filter
Top Products
Using the Controls - 2 Speed Combo Models
3
C
ycles, options, lights
W
hat can & cannot be
washed
o
perating tips
d
ishwasher use
l
oading
C
ontrols at a glance
D
ryer Exhaust tips
S
afety
Care & Cleaning
Service & Warranty
S
urface Cooking
t
roubleshooting
O
ven Cooking
Storing the washer
Installation
Special Features
N
otes
STEP 1
W
A
TER LEVEL SETTING LOAD SIZE
Mini (select models)
1/
4 F
ull
Medium 1/4 – 3/4
Super 3/4 – Full
Note: Items must circulate freely for best results.
Select LOAD SIZE
Determine the selected setting based on load size.
Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become nece
ssary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to
Reset and then
back to the desired setting.
Select Cycle and Water
Temperature
To select a cycle and water temperature, push the
control dial
in (off position) and turn it to the right
(clockwise) until the pointer is at the number of
minute
s and water temperature needed for the wash
load in the COTTONS, WRINKLE-FREE FABRICS or
DELICATES c
ycles. All rinses use cold water.
COTTONS Cycle
Used to wash Cottons and heavily soiled items.
WRINKLE-FREE FABRICS Cycle
Used to minimize wrinkles with a cool-down spray
rinse following the wash.
DELICATES Cycle
Used for items requiring delicate wash action. The
washer will fill, then agit
ate and soak alternately
.
STEP 2
Note: In wash water temperatures below 60
°
F
(16° C), detergents
do not dissolve well or clean
well. Care labels define cold water as up to 85
°
F
(29° C).