This is an easy fix if you have apair of pliers and a screw driver you can fix this one. I payed the sears guy what I could have done.
Remove the two screws at the bottom of the washer
Remove the pannel at the bottom of the washer
You should see a pump on the right hand side right in front.
Just behind the pump there is a rubber hose--sump looking thing Remove the 3 hose clamps holding the hose--sump on.
Dump out the contents, chances are that your washer will tip you with a couple of quarters and nickle or to from your jeans that are now washed and in the closet.
now just replace the hose--sump to the proper fittings and check those pockets for any tips before you do the next load of jeans.
General Electric Washer WBSE2090 Please help find the manual for this General Electric Washer Can't find manual. The problem is the agitator does not turn. The water does enter and drain out. …