Login

RSS What is this?

Are You an Employee of Samsung?

Let us know you're looking at the manuals we've found and help us provide better support to your customers.

Email address:
Member Tip

Samsung Front-Load Gas Dryer DV206AGS/XAA

LP conversion
Posted by jerrykatz1 on May 2nd, 2008 at 5:57pm

I saw where another member needed to know how to access the gas assembly for LP conversion. On mine, it was difficult to figure out since there is no access panel. You have to take the top panel off (two screws in the back). Then remove the four screws on the plastic top front control panel, lean outward and bump in the center to release the fixed clips. Then you can remove the door (two screws) and the door keeper (two screws) the oposing side door screws (two) and the two screws at the bottom inside door circle. at this point there are as I recall, four screws at the top that you can get to after the control panel has been moved aside. After removing all these you can lift the front panel up and off. Take care with the assembly, not to break the igniter. You can first remove the screw in the rear panel to release the gas pipe, then remove screws to allow removal of the gas assembly to give access to change the conversion orfice and regulator pin parts. This was by far the most difficult change out that I've seen. Once you have done it, it is much easier to put back together.

Add a Comment Comment (1)



2 members are watching this tip.

Was this tip useful?


Comment On This Tip

  • LP conversion
    Posted by w7raa on Jul 3rd, 2008 at 6:39pm

    Jerry Katz saved me a lot of time fretting about where to start with the conversion. I was able to do everything within an hour.

    If you need the conversion kit, it is a Maytag MAL9000AXX. It's almost a "breeze".

    Thanks, Jerry.

    Was this comment useful?

A Clean Home is Within Reach
Do dust, dirt, and dander build up seem like an insurmountable enemy? Remember, every villain too has its foe. For the contemporary home, riddled with dust-producing items, the Eureka Capture packs just the right one-two, dust-eliminating punch to help restore order.

Champion of the 2007 Good Design Award, the Eureka Capture attacks all dust havens, even tight corners and hard-to-reach areas. The highly mobile unit sits on soft EZ Roll wheels, and comes with an odor eliminating HEPA filter, Power Paw with Riser Visor, and electrostatically-charged Self-Cleaning Duster to get at the mess your hands cannot. The Eureka Capture is the cleaning solution that won't miss and is available at retailers nationwide.

Add Comment


(optional)
If you have a helpful URL, add it here.
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 

Recent Blog Posts



Recent User Activity



OwnerIQ Network | Manufacturers | About | Research | Press