RSS What is this?

Frigidaire Washer Manuals

Choose from our list of products below:
# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Don't See the Model Number Listed?
Ask the membership for help locating your missing manual.

Member Discussion on Frigidaire FCCW3000FSI Washer

stuck between final spin & tumbling/off cycles

cycle not advancing, stalled indefinitely.
evacuation pump works, start button works
machine brand new
any suggestions?
kengle@pleasetouchmuseum.org

Add a comment   |  

Comments

  • Frigidaire Front-Load Washer FCCW3000FSI

    addenda: the timer motor appears to be OK - 2300 ohm, the water-level switch is fine - terminals 1 to 2 0.3ohm - infinity when blow in tube, terminals 2 to 3 infinity, 0.3 when blow in tube. Time stalls in all 4 cycle modes just before 12 O'Clock - "off" and door remains locked with lock light on.

    Was this comment useful?

  • Frigidaire Front-Load Washer FCCW3000FSI

    Additional addenda: Timer mechanism removed and placed in working machine - no fault. Same performed for water level switch - no fault. Hose not occluded. Timer motor voltage is 250mVac during stall.

    Was this comment useful?

  • frigidaire front loader

    My sister inlaw just moved and gave me her front loader. I am having the same problems with it getting stuck between cycles.. She told me if the washer is not full enough it wont spin, Well I packed it, then she says see if its level? It wont budge its level it gets stuck in ever washer cycle or soin. so if you figure this out let me know too please. Ty.....sha9ben@aol.com

    Was this comment useful?

  • Stuck between Cycles

    I checked every component - the last being the controller board which resides in an aluminum box on the floor of the base. There were three burn spots where components had failed. I purchased a new controller board, installed and tested - A O K.

    Was this comment useful?


Add Comment


(optional)

If you have a helpful URL, add it here.
Product Picture:
(optional)

Supported file types: .jpg, .gif, .png
 
Need Kenmore Parts or Manuals?
Find all of the parts you need or replace your missing manuals now at the Customer Care Center at Kenmore.com. All of the resources you need on one place to help you get started on your repairs fast.



About OwnerIQ | Advertise | Manufacturers | Terms and Conditions | Privacy Policy